|
CLICK ON PHOTO TO PURCHASE |
|
 |
HAMMERFORMING
Featuring Ron Fournier & Ron Covell
Two of the best-known names in metalshaping have teamed up to teach you the ins and outs of the hammerforming process.
Length, 76 min. Featuring Ron Fournier & Ron Covell
Two of the best-known names in metalshaping have teamed up to teach you the ins and outs of the hammerforming process.
The two Ron's bring over 70 years of combined experience to their viewers, and you will see how their individual styles of working with metal compliment each other.
Hammerforms are very easy to make, and they enable you to create parts that have the look and accuracy of die-stamped parts. Even beginning metalworkers can use hammerforms to quickly and easily make parts of which they can be proud.
Ten different hammerforming operations are demonstrated, from simple tank tops to a beautiful rolled edge detail on a complicated pontoon Bugatti fender.
The video includes instruction and demonstrations on the following topics:
• Tank Top
• Grille Bar
• Annealing
• Chipmunk Tombstone
• Bowl Shapes
• Flying Wire Fairing
• Wing Rib
• Door Post
• Naca Duct
• Bicycle Seat Post
• Bugatti Fender
Featuring striking close-up shots that bring you close to the action, and clear descriptions of every aspect of the hammerforming process.
Length, 76 min. #HFD00
| Details |
 |
| |
| Weight |
1.00 lbs |
| Price: |
$20.00 |
|
 |
Paintucation™'s "Body Panel Replacement" demonstrates clear procedures for replacing sheet metal on your modern or vintage vehicle. This double DVD set includes:
- Full Quarter PAnel Replacement;
- Leading & Body Solder Techniques;
- Door Skin Replacement;
- Welded Partial Quarter Panels and;
- Modern Panel Bonding Adhesives.
Kevin Tetz guides you through many more tips and tricks to take the mystery out of sheet metal replacement!
#PNT005
2 DVD SET - 152 minutes
| Details |
|
| |
| Weight |
1.00 lbs |
| Price: |
$59.95 |
|
 |
Paintucation™ 's "How to Paint Your Own Car" is a step-by-step instructional film that takes you through every stage of a basecoat/clearcoat overall paint job, with detailed procedures and trade secrets revealed.
Kevin Tetz guides you into areas such as:
• blocking
• masking
• preparation
• paint application
• buffing
Many time and money saving tips are revealed and explained in this 70 minute film, making it a valuable tool for the first time painter as well as the experienced professional.
#PNT001
DVD - 70 minutes
| Details |
|
| |
| Weight |
1.00 lbs |
| Price: |
$39.95 |
|
 |
Paintucation™ 's "Color Sanding & Buffing" is a step-by-step instructional dvd that takes you through every type of buffing and paint repair, with detailed procedures and trade secrets revealed.
Kevin Tetz guides you into areas such as reviving old paint, removing runs and buffing for show, as well as telling you how to avoid the most common and costly mistakes!
#PNT003
DVD - 60 minutes
| Details |
|
| |
| Weight |
1.00 lbs |
| Price: |
$39.95 |
|
 |
A 'must see' for the serious metal working student! Watch as Ron Covell thoroughly demonstrates basic hammer and dolly techniques and shows how to do high-level metal work which requires no filler.
During the video, Ron starts with a 1932 Morgan in very bad condition, and goes through every step of perfectly restoring the body. Great coverage of hole fillig, patch panels, wired edge repair, rust repair, TIG welding, metal finishing and shrinking. You will see how top-quality metalwork can be one with very simple tools!
Length 100 min.
Available in DVD!
#BTS01
| Details |
|
| |
| Weight |
1.00 lbs |
| Price: |
$40.00 |
|
 |
John Glover demonstates metal shaping techniques using hand tools and the English wheel.
111 min. John Glover demonstates metal shaping techniques using hand tools and the English wheel.
Master craftsman John Glover combines his years of practice, experience and hard work in this video to present shaping techniques that will appeal to a broad audience of metal workers.
111 min., DVD
| Details |
|
| |
| Weight |
1.00 lbs |
| Price: |
$40.00 |
|
 |
Now available in DVD!
Excellent demonstration of basic techniques on the English wheel by master craftsman John Glover.
THIS VIDEO COVERS:
* Proper setup of the English Wheel
* How to track properly
* How to form a crown in a piece
* How to "wheel" round pieces
* How to remove or let out too much crown
* Use and readings of templates
Learning to track properly is the sole foundation for making smooth compound curves and being able to blend curves into flat areas.
Excellent demonstration of basic techniques on the English wheel.
96 min.
| Details |
|
| |
| Weight |
2.00 lbs |
| Price: |
$40.00 |
|
 |
Craig Naff is one of the finest metalworkers in the nation, with milestone credits to his name such as the Smoothster, Cadzilla, and SmoothNess.
This video features a tour through Craig's shop, showing his projects and equipment, then he demonstrates making a skirted fender with a wired and beaded edge. You'll be amazed as the fender takes shape, with each piece formed so perfectly that little finish work is needed.
DVD, 97 min., #CNV00-D
| Details |
|
| |
| Weight |
0.25 lbs |
| Price: |
$35.00 |
|
 |
Ron explains the technique of blocking and smoothing aluminum parts using shot bags, mallets, heads and slappers. Final smoothing is demonstrated on the English wheel.
A variety of shapes are made, including: bowl, tear drop, and motorcycle fender. Also, forming a section of a patch panel for a sports car fender using a buck.
Thorough explanation of the tools and equipment used to form .050" and .063" aluminum projects.
90 min. DVD #BSD00
| Details |
|
| |
| Weight |
1.00 lbs |
| Price: |
$17.00 |
|
 |
|
|
MAKE A MODEL A FENDER
Now available as a 2 DVD set!
Watch master craftsman John Glover create a Model A fender during 4 hours of instructional metal shaping and demonstration.
THIS SET INCLUDES SEGMENTS ON:
• How to dissect the fender into workable panels.
• Forming of 7 different panels, all with different shapes.
• How to throw a flange with the English wheel.
• How to wire and joggle an edge.
• How to assemble panels.
This 2-tape set covers a complex project from start to finish, working with steel on an English wheel.
Mr. Glover shows his lifetime's experience of metal working during this demonstration of advanced metal working techniques.
4 hrs. available in 2 DVD or 2 VHS set
| Details |
|
| |
| Weight |
4.00 lbs |
| Price: |
$75.00 |
|
|
 |
How To Gas-Weld Aluminum by Ron Fournier covers essential equipment, methods and benefits of tack-welding, fitting and joint preparation, and how to produce fusion-type welds with lipping, butt-welds and tank corner welds. Demonstrations of straight welds, corners and curved sections are included in this instructional film.
60 min. DVD only
# GWD00
| Details |
|
| |
| Weight |
1.00 lbs |
| Price: |
$15.00 |
|
 |
Ron Covell demonstrates dozens of ways to work with tubing, including bending with heat, bending with tube bending machines (both inexpensive and high-end machines), mitering, flaring and tapering tubing.
An extensive section deals with using U-bends, showing how to create anything from simple water pipes to elaborate headers.
One of Ron's most popular videos ~ great information communicated concisely with lots of close up shots!
DVD - 95 min., #WTV01
| Details |
|
| |
| Weight |
1.00 lbs |
| Price: |
$40.00 |
|
 |
During this informative video Steve discusses the fine points of high-end metalwork, his tool collection and gives great demonstrations of making gas tanks and hoods.
He also demonstrates gas-welding aluminum and gives an in-depth look at some beautiful metal finished modifications to a 1932 Ford coupe. DVD, 48 min., #SDD00
| Details |
|
| |
| Weight |
0.25 lbs |
| Price: |
$20.00 |
|
 |
Watch Ron go through every step of making a track roadster nose, demonstrating techniques suitable for making virtually any body panel.
He starts with a station buck definining each piece and finally joins them together. Annealing, mallet and sandbag rough shaping, hammer and dolly smoothing, metal finishing are all demonstrated. Oxy-acetylene and TIG welding are covered in-depth, as well.
DVD - 105 min.
| Details |
|
| |
| Weight |
1.00 lbs |
| Price: |
$40.00 |
|
 |
Ron shows and explains a variety of bucks. Step-by-step demonstration on building a sectional fender buck. Additional topics include: material & fastening recommendations, determining the frequency of stations, construction differences between single use and low-production bucks.
60 min. DVD, BPD00
| Details |
|
| |
| Weight |
1.00 lbs |
| Price: |
$15.00 |
|
 |
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier video!
In this video Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
90 min., DVD #LED00
| Details |
|
| |
| Weight |
1.00 lbs |
| Price: |
$17.50 |
|
 |
A comprehensive overview to the "Hand Tools" of the Trade!
by Ron Fournier
This tape covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
90 min., DVD
| Details |
|
| |
| Weight |
1.00 lbs |
| Price: |
$17.00 |
|
|
|
|
